HYD-LC3000 Laser expansion control card

Laser expansion control card interface specification V2.0

      HYD-LC3000  laser control board interfaces is as follows：

u  3 motor control ports（MOTOR1，MOTOR2，MOTOR3）

u  1 line shaft encoder input（Encoder）

u  9 dedicated input ports（Home1，Home2，Home3，3 motor positive and negative limits) (The input port can be active at high level or low level, which is selected by         the switch, and the default setting is low level active)

u  12 general input ports (The port can be active at high level or low level, which is selected by the switch, and the default setting is low level active)

u  2 lines relay contact output (Normally open or normally closed)

u  6 linesThyristor high-level output (Output3-8, 24V high level output, output current 500mA)

u  4 lines Thyristor low-level output (Output 9-12, 0V low level output, output current 200mA)

u  2 lines Analog output (DA1&DA2, 0-10V output, maximum current 200mA)

u  2 lines PWM Modulation signal output (P1+&P1-, P2+&P2-, frequency 0-50KHz, duty cycle 0~100% adjustable, level supports 5V/24V selection, default setting is 24V         level, maximum current 200mA)

u  Support standard Modbus RTU and HMI communication, easy to operate